Items in bag

WOW0821240209BLCLJLLLML

  • Free shippingOn all prepaid orders

  • 10 dayreturns

  • COD available all for Orders Under Rs. 3000

  • India's largest selectionof Beauty Products

  • Moen 8716 Home 16-Inch Bathroom Grab Bar, Stainless
  • Moen 8716 Home 16-Inch Bathroom Grab Bar, Stainless
  • Moen 8716 Home 16-Inch Bathroom Grab Bar, Stainless

Moen

Moen 8716 Home 16-Inch Bathroom Grab Bar, Stainless

Moen

Moen 8716 Home 16-Inch Bathroom Grab Bar, Stainless

¥10,292 ¥6,176 Save: (39.99%)
¥6,176 ¥10,292 Save ¥4,116 (39.99%)
Delivery Time: 12-18 days

Quantity:

  • 1
    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8
    • 9
    • 10
Delivery Time: 12-18 days

Import Duties to be borne by the customer at the time of delivery.
Product price is exclusive of such duties.

4 Great Reasons To Buy From Us:

  • Tracked Shipping on all orders

  • 100% Original
    Products

  • Secure Payments

  • 10 Days Returns

  • Tracked Shipping on all orders

  • 100% Original
    Products

  • Secure Payments

  • 10 Days Returns

Product Description Product Description
  • COORDINATING FINISH: Stainless finish coordinates with today's popular kitchen appliances and accessories
  • SUPPORTIVE DESIGN: Bathroom grab bar supports up to 500 lbs when installed in a stug or when using SecureMounts (not included)
  • SAFE AND SECURE: SecureMount design for easy, secure installation (sold separately)
  • PEACE-OF-MIND: Designed for hassle-free installation
  • BUILT TO LAST: Backed by Moens Limited Warranty
Read More
Read Less
Reviews See all reviews

Customer Reviews

these are great. My ONLY complaint is that the escutcheon that ...For the money, these are great. My ONLY complaint is that the escutcheon that hides the screwed on flange could fit a little more firmly. I have several of these grab bars and some are nice and tight after being snapped on, and some are not. But they are strong, easily cleaned, and very well priced comparatively. Screw holes are easy to use. Sure, most stainless screws are not that great. These are no exception, but with a bit of care, they go in fine. If you are putting a screw into an old stud, you should pre-drill the hole a little. I found I barely needed to penetrate the stud, then put a bit of bar soap on the screw to lubricate it, (don't use oil as that will remain and the screw could loosen) and then the screws go in nicely. I put a bit of caulk in the hole also, after the screw was partially in. Just fine. Sure the screw would be perfect if it were star drive, but.... Fine5Good sturdy grab bar.This is a nice sturdy and attractive grab bar. The idea of staggering the mounting holes in the mounting ring is great, as it allows 3 mounting screws in each mounting plate when mounting to the narrow end of a 2x4. I deducted 1 star from the rating, because even after drilling the 1/8" pilot holes as specified, I got the first mounting screw about 1/2 way in, with my DeWalt driver/drill, and the head completely stripped. Mounting screws need to be made from harder steel, or the pilot hole needs to be larger, so the screws go in easier.4Highly recommended. Stylish and functional grab bar for any application where the danger of slips and falls is present. I installed on in a bathtub wall to assist entering and exiting, and it seems wholly satisfactory. In this case, I drilled through ceramic tile and screwed it directly into the wall studs (which are on 16" centers and perfectly placed for this length bar). Highly recommended. 5Slotted circular mounting holes make installation easyMany grab bars have three holes. This makes it harder to line up with a wall stud, especially if the studs are not exactly 16" on center. This model has both the three holes that others have, as well as slotted holes between them. The other thing I like is the Moen SecureMount plates (sold separately) for situations where there isn't a stud in the wall where you need it. The SecureMount plates enable an easy, strong attachment to the wall. I used the Wingits RC-WA200GT54 drill bit (sold separately) to make the 1-1/4" holes needed for these SecureMount plates. Awesome drill bit. Wingits also makes a mounting plate/anchor too, but at $50 each, I chose the $10 Moen version instead.5Attachment points into wall studs.This item was used for a grab bar in a tub/shower with ceramic tile walls. The mounting hole plate and pattern were very different from other grab bars I had used in the past. On the other bars the mounting plate was loose on the bar which meant the ring could be rotated for optimum hole location when being attached to rhe wall. On the Moen bar the mounting ring is welded to the bar so you have no option on mounting location for the screws. Instead of three mounting screws per wall stud I was only able to use two with the Moen.4BEWARE OF INSTALLATION CAUTIONIt serves the purpose of safety in the bathtub, but one note of caution for the installation. The supplied screws are garbage. Soft stainless steel that the heads strip out during installation. The instructions say a 1/8 drill bit for pre-drilling the mounting screws. When done this way, no amount of speed reduction with a power driver will save the head from stripping and the 1/8 pre-drilling makes using a manual driver VERY difficult. THE ANSWER. Don't use the cheesy screws that come with the unit. Go to your local HomeDepot or Lowe's and get top grade SS screws or even better if you can find them SS hex head screws. I had to remove two of the cheesy screws with adjustable pliers before I learned this lessen.4Cheap bolts!!!Why can't vendors use good quality bolts with their products. One snapped in half while I was screwing it in. I had pre-drilled with the correct bit size from their documentation. Because of this I had to re-drill a hole which through off the center of where the post attaching to the grab bar would be. I ended up going into my workshop and found a Made in America that went in the new hole with no problems. I see this issue all too often with hardware made in other countries. Most of their products are good but they use lousy hardware.2Complements chrome fixtures and chrome accessories. Very attractive. I did not expect these grab bars to go so well with my chrome bathroom accessories. Chrome grab bars called too much attention to themselves and looked cheap. These Moen Stainless Steel Grab bars look great in my shower.Stainless steel is definitely the way to go! Does not show water marks. Provides a good hand grip. These 16" hand grips were screwed into the wall studs on each end, providing the needed weight bearing support. 5and looks great. (I specifically ordered this one to match the ... Extremely well-made, strong durable, and looks great. (I specifically ordered this one to match the ones in her bathrooms, and it does perfectly.) I just found the stud (singular, as I mounted this one vertically) and screwed it in. I feel VERY secure that my mother will be able to get in and out of that doorway without falling or losing her balance. 5Can't Go Wrong With This Grab Bar (at any length)!Moen is certainly a premium brand. I have installed more than a dozen of their grab bars in my current and past residences combined. The key to a secure installation is to either secure it into a wall stud directly using the screw hardware provided, or to complete the installation with WingIts grab bar mounting kits when you have to mount one or both ends of the grab bar into a hollow sheet rock wall. What a life saver this two-fold combination as been for fall prevention of my loved one. Please be sure you get the most appropriate diameter grab bar for your needs, as they come in several dimensions. My own choice has been the 8700 series, as the 8900 series was too large for my wife to grasp most effectively. I had to remove one star for the lower quality screws that they supply, as the screw's cross-point heads get deformed when going into a 2x4 stud, even with a pre-drilled hole. And they get deformed even worse if you have to remove them for any reason (e.g., relocation or to start over again). You should go to your hardware store for premium quality stainless steel screws of similar size if you need to mount in a stud.4Good bar, cheap mounting screws!I would have given this 5 stars all the way except for the cheap screws that are furnished with the bar. They kept stripping out and I had to go to Home Depot for quality replacements. Just to save a few cents the manufacturer has caused a serious down grade in its rating. Not very smart.3Excellent grab bars, excellent priceI had knee replacement surgery in March 2015 and will have the other knee replaced in August 2015. These grab bars are great. My home health occupational therapist marked where they needed to go inside my tub/shower. My handyman used a stud finder and I ordered one that's 16 inches and one that's 18 inches. My handyman then came back and installed them. The Moen bars are at least half the price of others that seem exactly the same. They are sturdy and handsome. I plan to get another one for outside my tub when I have my next surgery. It just makes getting in and out that much easier both with and without the shower chair. I recommend these grab bars5Solid, works wellWe were redoing an old shower, and wanted some solid grab bars for safety purposes. I took the time to find the location of the studs in the wall and made sure I hit these with the provided screws during installation. They feel solid enough that an army tank couldn't pull them off the wall...it might pull the wall down, but the bars would still be attached to it. As a side note, since this was installed in a shower, I put a small squirt of silicone caulk around the screw holes as I put them in, and this seems to have sealed them up nicely. Overall, very satisfied with the purchase.5
See All Reviews
Delivery Delivery
  • Shipment tracking ID will be provided after your product(s) is dispatched.
  • The delivery date stated is indicative and subject to availability, payment authorization, verification, and processing.
  • In case your product(s) is not delivered due to an incorrect or invalid address, we will not be able to process any claims. However, we will notify you if it is returned to us.
Returns Return
  • Return or exchange requests can be made within 10 days of the delivery date.
  • To return or exchange any items, please email us at info@ninelife.jp, clearly mentioning your order number and our customer support team will guide you on the process.
  • To be eligible for return, products must be in the exact condition you received them in. All packaging material must be undamaged and unused with the price tags intact.
  • Orders can be cancelled before dispatch. If the order has already been dispatched, cancellation fees might be charged.
  • Due to the nature of the products that we sell, we will not be able to replace or refund unwanted items if they have been opened or any seals are broken.
  • The refund will not include the import duties or the cost of delivery or return postage.
  • If your refund is approved, then it will automatically be credited to the original method of payment, within 7-10 days.
  • NineLife reserves the right to alter and enforce this Return and Refund Policy at any time without having to serve a prior notice to users.

Recently Viewed

Back to Top